Jump to content

Removing Teams from a rom


Recommended Posts

You will want to remove them from the standings and leader boards too. I found it annoying that the teams I removed were at the top of the Defense Leader Board all the time (they had 0 yards against them afterall).

 

NFL STANDINGS screen:

23ADB - 23AE8 - CURSOR SETUP (x:y coords) Here, it's the setup for the 3 Divisions for each Conf. + the PLAYOFF screen. (7 coords in total) ordered by "ROWS" (E/ C/ W), then the coords for PLAYOFF

23F6D - 23F78 - TEAM ORDER/ TEAMS PER DIVISION Every 2 bytes correspond a DIVISION. First offset will be the Division's FIRST team, and the following the NUMBER of teams this division has.ordered by "ROWS" (E/ C/ W) *WITH THE RESTRICTION THAT EVERY DIVISION MUST HAVE 4 or 5 TEAMS (unless you apply that other hack some roms have, which I don't know how)

 

TEAM RANKINGS screen:

NFL TOTAL OFFENSE: 2397C - 2397D 2 offsets. First offset corresponds to the FIRST team this screen will show, the second offset will be for the LAST team shown on this list. (default 00-BUF, 1C-ATL)

AFC OFFENSE: 23980 - 23981 2 offsets First offset corresponds to the FIRST team this screen will show, the second offset will be for the LAST team shown on this list. (default 00-BUF, 0E-SEA)

NFC OFFENSE: 23984 - 23985 2 offsets First offset corresponds to the FIRST team this screen will show, the second offset will be for the LAST team shown on this list. (default 0F-WAS, 1C-ATL)

 

NFL TOTAL DEFENSE: 23988 - 23989 2 offsets. First offset corresponds to the FIRST team this screen will show, the second offset will be for the LAST team shown on this list. (default 00-BUF, 1C-ATL)

AFC DEFENSE: 2398C - 2398D 2 offsets First offset corresponds to the FIRST team this screen will show, the second offset will be for the LAST team shown on this list. (default 00-BUF, 0E-SEA)

NFC DEFENSE: 23990 - 23991 2 offsets First offset corresponds to the FIRST team this screen will show, the second offset will be for the LAST team shown on this list. (default 0F-WAS, 1C-ATL)

 

*BUT, if you want to remove a team from one of this lists, you can only CUT it from, either the Top, or the Bottom. (making the teams in the middle shown as UNREMOVED)

 

**BTW, when I say this: ordered by "ROWS" : 00  05  09...(EAST/ CENTRAL/ WEST)  it means:

00=BUF, 05=CIN, 09=DEN

01=IND, 06=CLE, 0A=KC. 

02=MIA,    ..and so on. THIS IS ONLY FOR SHOWING THIS ORDER ON-SCREEN ( But the BUF=00 to ATL=1C ORDER is present all the time ) (1C in HEX language = 28 )

Link to comment
Share on other sites

  • 11 months later...

Sorry to dig up a year old topic, but I came across some more information that should be helpful.

 

As you know, I've been screwing around a lot trying to make different roms (just to mess around with the game for the sole purpose of messing around with the game).  I'm making a 20 rom team based mostly off of the 16 team rom I've been working on, but I found an issue on the preseason and team control screens that I was able to find a fix for.

 

Using the methods outlined in this thread, I was able to get everything the way I needed.  It seemed that the rom did not like having five teams in the AFC central, as I did not ever have this issue when there were four teams there.  No matter what I did with the hex x1f8b5 I couldn't keep a "]" looking character from appearing where Denver's text would be.  By changing x1e94d to x79, I was able to get rid of it on the team data screen only.  I then noticed some very similar strings of hex:

 

x1e345 to x1e362 -- affects the text position on the team control screen

 

x1e23f to x1e25c -- affects the text position on the preseason screen

 

I may be way off here, but just like the text at x1e943 it looks like each string of five bytes correlates to each division, with the first two bytes in each string seemingly being coordinates for the text.  For the team data screen, I subtracted x0A from the first byte corresponding to the AFC West and it made the character disappear. 

 

My issue was that messing with that first byte on the other two screens froze the game or caused wacky glitches.  Instead I had to change the second byte (I just added x0A) for the other two screens, and that took care of the issue.

 

Edited by adscl84
Link to comment
Share on other sites

  • 2 years later...

After removing teams, how do you adjust the remaining teams in order so that divisions are grouped together like they should be? I removed the BIlls, Bengals, Broncos and the Falcons and restored them in place of other teams so that I could eliminate the first and last teams in team rankings, but I'm having problems on the preseason and team control screens, especially with the cursor not starting off on the first team like it should be, which is now the Colts.

no cursor on preseason menu.png

no cursor on preseason menu 2.png

no cursor on team control menu.png

no cursor on team control menu 2.png

Link to comment
Share on other sites

  • 4 years later...

 

On 5/18/2013 at 8:41 PM, pambazos88 said:

NFL STANDINGS screen:

 

23F6D - 23F78 - TEAM ORDER/ TEAMS PER DIVISION Every 2 bytes correspond a DIVISION. First offset will be the Division's FIRST team, and the following the NUMBER of teams this division has.ordered by "ROWS" (E/ C/ W) *WITH THE RESTRICTION THAT EVERY DIVISION MUST HAVE 4 or 5 TEAMS (unless you apply that other hack some roms have, which I don't know how)

 

** 32 Team Rom **

 

Team order/co-ordinates 3FFC9

3F799 - 3F7AA - TEAM ORDER/ TEAMS PER DIVISION Every 2 bytes correspond a DIVISION. First offset will be the Division's FIRST team, and the following the NUMBER of teams this division has.ordered by "ROWS" (E/ C/ W) *WITH THE RESTRICTION THAT EVERY DIVISION MUST HAVE 4 or 5 TEAMS (unless you apply that other hack some roms have, which I don't know how)

Link to comment
Share on other sites

7 hours ago, kefkaroth said:

would be nice to see a 30 team rom. i would like to make an accurate 1995 and 1996 season of the nes version by copying the players and stats from the 16 bit and psx games.

 

There is a WIP version here.

 

 

 

Just going through this recently and grouping the NFC West Teams graphically into a 5 man division is problematic because they're segmented in order and inbetween the end of the 28 teams and the last 4 teams are the ProBowl teams.

 

unknown.png

 

The simplest workaround is to just not show all the teams in the NFC West

Link to comment
Share on other sites

1 hour ago, fgqb#19nyj said:

is there a way to place the probowl teams so that they're behind the last four NFC teams? I can get 4 out of the 5 teams in the standings screen. But what good is that if you can't get all of them?

 

Pro Bowl teams are essentially teams 29/30.  I think the move would be to make them teams 27/28 because then you're set up for both a 30 and 31 team rom. Given how this particular screen relies on the teams being in sequential order, it's probable that there are some/many things that would break elsewhere with the teams no longer being in order.

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...