BAD_AL Posted January 1, 2014 Author Share Posted January 1, 2014 (edited) Tool updated again [new version = 1.0.0.3] (due to some extra time I had this holiday season) I've kept up version '0.91 Beta' because that is probably the best tested version. File is located in first post in this topic. http://tecmobowl.org/topic/11106-tsb-editor-tsbtool-supreme-season-generator/ 1. Added Schedule GUI 2. Added support for CXROM 1.11 (Except formations) 3. Added a few hacks from: http://tecmobowl.org/topic/58074-2013-hack-year-in-review/. 4. Added a Menu item under 'HACKS' that will check all the 'SET' commands looking for locations that were set more than once (so you can see if the hacks conflict with one another). ================================================================================ Double click on schedule to bring up scheduler gui. CXROM 1.11 Rom should not really be used, but I added support for it to make the program more compatible with it's java (android) counterpart. Added a menu item that will check every 'SET' command loaded into the editor to ensure that you're not setting the same location multiple times (it will however ignore warning you against identical lines because you're setting them to exactly the same value and hence there isn't a conflict). Also, for SET commands like: >>>> SET(0x2224B, {28TeamNES PromptUser:Msg="Enter desired quarter length":int(1-15)} ) The line will only apply to a 28 Team ROM, it will not be applied to a SNES or 32 team ROM. Edited January 2, 2014 by BAD_AL DFM and brookstonfowler 2 Quote Link to comment Share on other sites More sharing options...
bruddog Posted January 2, 2014 Share Posted January 2, 2014 I found at least one incorrect set command. I'm sure this is due to trying to do compares as some of the roms may not have been only modified with one thing. The Th int return hack has: SET(0xbfb5,0xe3fcfcffe031fefae3fcfcffe030fe) It should be SET (0xBFC5, 0xF720E100E00AE208E304F608E4DFFEFF) Quote Link to comment Share on other sites More sharing options...
BAD_AL Posted January 30, 2014 Author Share Posted January 30, 2014 I found at least one incorrect set command. I'm sure this is due to trying to do compares as some of the roms may not have been only modified with one thing. The Th int return hack has: SET(0xbfb5,0xe3fcfcffe031fefae3fcfcffe030fe) It should be SET (0xBFC5, 0xF720E100E00AE208E304F608E4DFFEFF) ok, I'll fix that in the next release. Quote Link to comment Share on other sites More sharing options...
Knobbe Posted February 25, 2014 Share Posted February 25, 2014 Edit for the Run/Pass Ratio 00 = 50/50 01 = More Run (60% Run)02 = More Pass (60% Pass)03 = Heavy Pass (70% Pass)See this thread for more information....it's possible to change the ratios of values 1-3 Quote Link to comment Share on other sites More sharing options...
RBPD5015 Posted July 19, 2014 Share Posted July 19, 2014 BAD AI, Is there any way to edit the City name and the team name using this tool? Matt Quote Link to comment Share on other sites More sharing options...
Tecmonster Posted August 26, 2014 Share Posted August 26, 2014 Bad Al, while you're around and while it's fresh on my mind after just finishing my rom, is it possible to change the player attribute entry fields from drop-down fields to simple selection fields, like in my attached picture? I realize it sounds nit-picky but when you're entering the values for 960 players and there are about 6 fields per player on average, that equals 5,760 entries and scrolling/clicking a field multiple times to make one entry adds up after a while. I'd love to be able to just machine-gun through each player entry and save an hour or two. Quote Link to comment Share on other sites More sharing options...
DFM Posted August 26, 2014 Share Posted August 26, 2014 Bad Al, while you're around and while it's fresh on my mind after just finishing my rom, is it possible to change the player attribute entry fields from drop-down fields to simple selection fields, like in my attached picture? I realize it sounds nit-picky but when you're entering the values for 960 players and there are about 6 fields per player on average, that equals 5,760 entries and scrolling/clicking a field multiple times to make one entry adds up after a while. I'd love to be able to just machine-gun through each player entry and save an hour or two. TSBToolSupreme ideal player pop-up.jpg Why don't you use the text editor? You can rip through ratings. Knobbe 1 Quote Link to comment Share on other sites More sharing options...
Tecmonster Posted August 26, 2014 Share Posted August 26, 2014 Thanks for switching that to the proper forum Dave. Well, I tried text entry. With having to add the commas and spaces, it becomes just as time-consuming if not more so. When I enter ratings, I'm always holding a card in one hand to "underline" all the ratings as I go down my list, and have my mouse in the other. We're getting really specific now, but if there was a comma on the number section of the keyboard (instead of a period), then I might be able to enter via text at a quicker rate but it seems like if you wanted to go fast, you'd have to have both hands on the keyboard (left hand close to the comma and space button; right hand on the number section), which isn't feasible, for me at least. Quote Link to comment Share on other sites More sharing options...
Knobbe Posted August 26, 2014 Share Posted August 26, 2014 Thanks for switching that to the proper forum Dave. Well, I tried text entry. With having to add the commas and spaces, it becomes just as time-consuming if not more so. When I enter ratings, I'm always holding a card in one hand to "underline" all the ratings as I go down my list, and have my mouse in the other. We're getting really specific now, but if there was a comma on the number section of the keyboard (instead of a period), then I might be able to enter via text at a quicker rate but it seems like if you wanted to go fast, you'd have to have both hands on the keyboard (left hand close to the comma and space button; right hand on the number section), which isn't feasible, for me at least. Did you know you can open a txt file in Excel as a CSV and vice versa? Are you changing attributes by hand while looking at a print out of Madden ratings? Wow! Quote Link to comment Share on other sites More sharing options...
Tecmonster Posted August 26, 2014 Share Posted August 26, 2014 Amazingly, no, I didn't know that. So I can save the TSBTool roster as a .csv file, open it in Excel to enter the player ratings and save again as a .csv file, then re-open it as a text file in TSBTool without issues? Is that how you guys do it? Quote Link to comment Share on other sites More sharing options...
Knobbe Posted August 27, 2014 Share Posted August 27, 2014 Amazingly, no, I didn't know that. So I can save the TSBTool roster as a .csv file, open it in Excel to enter the player ratings and save again as a .csv file, then re-open it as a text file in TSBTool without issues? Is that how you guys do it? If I'm making mass edits, I do this exclusively. You can change the extension of a CSV and TXT file and it simply will dictate what program opens the file Quote Link to comment Share on other sites More sharing options...
Tecmonster Posted August 27, 2014 Share Posted August 27, 2014 Well, I guess I'll have to try that next year, thanks Knobbe. Any more tips on how to streamline the data entry process? It would be nice if there was a program that recognized names from one list (like a list with Madden-converted Tecmo ratings) and matched them up with highly similar names on another list (like a new season's roster file) and replaced the data therein. Quote Link to comment Share on other sites More sharing options...
Knobbe Posted August 27, 2014 Share Posted August 27, 2014 Well, I guess I'll have to try that next year, thanks Knobbe. Any more tips on how to streamline the data entry process? It would be nice if there was a program that recognized names from one list (like a list with Madden-converted Tecmo ratings) and matched them up with highly similar names on another list (like a new season's roster file) and replaced the data therein. Excel. This is what I'm building to rate 130 college teams. bruddog 1 Quote Link to comment Share on other sites More sharing options...
Bodom Posted August 27, 2014 Share Posted August 27, 2014 Well, I guess I'll have to try that next year, thanks Knobbe. Any more tips on how to streamline the data entry process? It would be nice if there was a program that recognized names from one list (like a list with Madden-converted Tecmo ratings) and matched them up with highly similar names on another list (like a new season's roster file) and replaced the data therein. Please tell me you have been using Excel for your ROMs! I'm going to post something in your ROM thread that should help you going forward. Quote Link to comment Share on other sites More sharing options...
Tecmonster Posted August 27, 2014 Share Posted August 27, 2014 Well, I use Excel to automatically convert the Madden ratings to Tecmo ratings. When it comes to entering those ratings into the roms though, no, I don't. I print out the ratings and then read them off to myself as I go down the list in TSBToolSupreme, starting with the Bills starting QB and ending with the Cardinals P. It takes forever. Quote Link to comment Share on other sites More sharing options...
bfbcards Posted April 18, 2015 Share Posted April 18, 2015 I've been working on this spreadsheet on and off for a while now. It's not quite finished but it helps take a bunch of the nit picky data entry stuff out of the equation. I have a lot of columns in there for notes and such but basically here's what you need to know to use the final sheet, Paste Config. playbook sheet - column C, F, and H, J, L, N, P, R, T, and V are all used to build this section: TEAM = bills SimData=0xab0, OFFENSIVE_FORMATION = 2RB_2WR_1TEPLAYBOOK R1215, P7131 I haven't worked out yet how the numbers in the playbook match up, most likely just the digit corresponds to the play in order. schedule sheet - this sheet is incomplete pending the 2015 schedule release. We know the opponents each team is facing, just not in what order aside from the London games. Starting at cell A37 I planned on using a an Excel formula to do the heavy lifting. QB/RB/WR/TE/OLINE/KICK/PUNT/DEF sheets - this is where the fun happens. Conf/Div/Team columns are there just for sorting purposes. Player names need to be changed in the firstname LASTNAME format. Face and Jersey can be inputted along with all player stats. Note the backups for positions traverse right just to make it easier for me to paste formulas. For RB/WR I also left in notes for kick/punt returners. Any highlighting indicates pro bowl or all pro which helped me determine stats. sim data sheet - the magic starts coming together here. Columns D, E, and F are for team sim stats and data entry from the above position sheets wind up here. Columns after each player stat are for sim data as desired. Note I have the original TSB Bills there just for my reference. Rows 38 and on are just my notes. Paste config sheet - this is what you'll need to build your rosters. Heavy use of the concatenate command along with some copy/pasting helped make this happen. Delete rows 22 through 55 as that was only a sample for me. Reading this thread I see there's a uniform section now, I'll need to work that in too. I hope this helps folks looking to make their own rosters and find data entry the most daunting part. Playbook.xlsx DFM 1 Quote Link to comment Share on other sites More sharing options...
MartinFN Posted October 10, 2015 Share Posted October 10, 2015 Bad_Al... Is there any chance of an update? Preferably one that edits jstouts 4-3 ROM? Quote Link to comment Share on other sites More sharing options...
SBlueman Posted February 20, 2017 Share Posted February 20, 2017 On 1/29/2014 at 8:01 PM, BAD_AL said: ok, I'll fix that in the next release. @BAD_AL just a heads up that the faster INT returns SET command didn't get updated yet. BTW...I have been saving text files of commands in the hack file but the drop down menu wont display all of them. I have 23 files saved but only 18 show up in the hack drop down menu. Any way to change that so all files will show? Quote Link to comment Share on other sites More sharing options...
Brett0965 Posted August 5, 2017 Share Posted August 5, 2017 How exactly is the team uniform and colors editing suppose to work. When I click "Edit teams" all that shows up is plays. How is it suppose to work? gojiphen malor 1 Quote Link to comment Share on other sites More sharing options...
gojiphen malor Posted August 5, 2017 Share Posted August 5, 2017 (edited) Click on 'View' Click 'Show Colors' Then 'View TSB Contents' You'll then see a line in the text that looks like this : COLORS Uniform1=0x200512, Uniform2=0x200712, DivChamp=0x2001022520, ConfChamp=0x15010220, UniformUsage=0x24248122 Then double click on that line. Hope this helps! Edited August 5, 2017 by gojiphen malor Quote Link to comment Share on other sites More sharing options...
Brett0965 Posted August 5, 2017 Share Posted August 5, 2017 What about editing team name and logo? Quote Link to comment Share on other sites More sharing options...
gojiphen malor Posted August 5, 2017 Share Posted August 5, 2017 Just now, Brett0965 said: What about editing team name and logo? For that you'll need to get into the HEX Editors. I like the one that comes with the FCEUX nes emulator. Quote Link to comment Share on other sites More sharing options...
Brett0965 Posted August 12, 2017 Share Posted August 12, 2017 On 8/5/2017 at 4:42 PM, gojiphen malor said: For that you'll need to get into the HEX Editors. I like the one that comes with the FCEUX nes emulator. And city names? Quote Link to comment Share on other sites More sharing options...
BAD_AL Posted October 10, 2017 Author Share Posted October 10, 2017 On 2/19/2017 at 7:14 PM, SBlueman said: @BAD_AL just a heads up that the faster INT returns SET command didn't get updated yet. BTW...I have been saving text files of commands in the hack file but the drop down menu wont display all of them. I have 23 files saved but only 18 show up in the hack drop down menu. Any way to change that so all files will show? I don't think I ever tried with that many. Could you zip up your setup and upload for me to have a look at? Quote Link to comment Share on other sites More sharing options...
SBlueman Posted October 15, 2017 Share Posted October 15, 2017 On 10/10/2017 at 3:14 PM, BAD_AL said: I don't think I ever tried with that many. Could you zip up your setup and upload for me to have a look at? . I ended up deleting the files out of the hacks folder. It was all just text files for each hack. I stopped trying to save them all there after I posted the SET Command thread Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.